The Tenda TEF1106P is a 6-port 10/100 Fast Ethernet PoE switch with 4 PoE ports and a 63W PoE budget. It powers IP cameras, VoIP phones, and wireless APs through the Ethernet cable, with no separate power adapter needed at each device. Available at TechDukan.pk.
Where You'll Use This
- π Home CCTV setup (up to 4 cameras) power your cameras through the same cable that carries the video feed, no extra plugs at each camera
- πͺ Small shop or office CCTV a clean, simple setup for a handful of cameras covering entrance, till, and storage areas
- πͺ Door intercom or access control system power a video door phone or access panel without a nearby power socket
- π‘ Small outdoor Wi-Fi access point deployment power an outdoor AP mounted where there's no electrical outlet
- π‘ Family home security upgrade a simple, affordable way to get your first proper CCTV system running
Key Features
- β
4Γ PoE Ports power devices through the Ethernet cable, up to 30W per port
- β
63W Total PoE Budget enough for 4 IP cameras or APs
- β
2Γ Uplink Ports connect your router and NVR
- β
Extend Mode up to 250m reach cameras far beyond the normal 100m cable limit
- β
Plug-and-Play no configuration needed
Specifications
| Specification |
Detail |
| Total Ports |
6 (4Γ PoE + 2Γ Uplink) |
| PoE Standard |
IEEE 802.3af/at |
| Total PoE Budget |
63W (max 30W per port) |
| Port Speed |
10/100Mbps (Fast Ethernet) |
| Extend Mode |
Up to 250m |
π¦ What's in the Box
π
PoE Switch Γ 1
π
Power Adapter Γ 1
π
Quick Start Guide Γ 1
π Why Buy from TechDukan.pk?β
100% Original Official Authorized Dealer
π Cash on Delivery Nationwide
π‘οΈ Official Warranty
π² WhatsApp:
+92 322 8218388
Frequently Asked Questions
What is PoE and why do I need a PoE switch for IP cameras? β
PoE (Power over Ethernet) lets a single Ethernet cable carry both network data and electrical power to a device, so no separate power adapter or nearby outlet is needed. Ideal for cameras mounted high on walls or ceilings.
How many cameras can the TEF1106P power simultaneously? β
4 PoE ports with a 63W total budget and up to 30W per port. Most IP cameras use 5β12W each, so 4 cameras at 10W each use 40W, well within budget.
What is Extend Mode? β
Normal Ethernet runs up to 100m. In Extend Mode the switch lowers the port speed to push data and power up to 250m, useful for cameras at a far gate or boundary wall.
Will it work with Hikvision cameras from TechDukan? β
Yes. The TEF1106P supports IEEE 802.3af/at PoE, the standard used by most wired PoE IP cameras. Connect and it auto-detects and powers the device.
When should I choose the TEF1110P or TEF1118P instead? β
TEF1106P for up to 4 PoE devices. TEF1110P (10-port, 8 PoE) for up to 8. TEF1118P (16 PoE ports + 2 Gigabit uplinks) for large deployments up to 16 devices. All available at TechDukan.pk.